SRT5KXLI, APC Smart-UPS On-Line,4500 Watts /5000 VA

SRT5KXLI, APC Smart-UPS On-Line,4500 Watts /5000 VA
*Gambar yang ditampilkan hanya ilustrasi atau bentuk umum
Part NumberSRT5KXLI
ModelSmart UPS RT On-Line
OUTPUTOutput Power Capacity4500 Watts / 5000 VA
Other Output Voltages220, 240
TopologyDouble Conversion Online
Electric Output Connections(6) IEC 320 C13, (4) IEC 320 C19
COMMUNICATION & MANAGEMENTInterface Port (s)Contact Closure, RJ-45 10/100 Base-T, RJ-45 Serial, Smart-Slot, USB
Control PanelMulti-function LCD status and control console
Typical Recharge Time1.50 Hour(s)
BATTERIES & RUNTIMERuntime by Half Load12 Minutes
Runtime by Full Load4 Minutes
Replacement BatteryAPCRBC140
Battery Quantity1
INPUTInput Frequency40 - 70 Hz (auto sensing)
Electric Input ConnectionsHard Wire 3 wire (1PH+N+G)
Input Voltage range for main operations160 - 275V
Input Voltage Adjustable range for mains operation100 - 275 (half load)V
PHYSICALMaximum Dimension H x W x D (mm)130 mm x 432 mm x 719 mm
Rack Height3U
Shipping Dimension H x W x D (mm)330 mm x 610 mm x 960 mm
Net Weight54.43 KG
Shipping Weight66.86 KG
CONFORMANCEWarranty3 years repair or replace (excluding battery) and 2 year for battery


LCD graphics display 
Text and mimic diagrams that display modes of operation, system parameters and alarms.
10/100 BaseT Connection 
Connect the device to a network using a 10 or 100 BaseT connection
ECO Mode 
Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
Green mode 
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Battery failure notification 
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Smart-UPS On-Line Features & Benefits

Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Scalable runtime
Allows additional run time to be quickly added as needed.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Network manageable
Provides remote power management of the UPS over the network.
InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
Customize UPS capabilities with management cards.
LED status indicators
Quickly understand unit and power status with visual indicators.
Serial connectivity
Provides management of the UPS via a serial port.
Plug-and-Play external batteries
Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Cold-start capable
Provides temporary battery power when the utility power is out.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

apc ini termasuk apc murah.

Write a review

Please login or register to review

  • Views: 8598
  • Product Code: APC Smart-UPS On-Line,4500 Watts /5000 VA
  • Availability: Hubungi Kami
  • Rp. 35,739,000
  • *Harga dan stock tidak mengikat. Untuk keterangan lebih lanjut hubungi kami

Tags: apc smart-ups, smart-ups on-line, apc smart-ups 4500 Watts, apc smart-ups 5000 VA